In this article I will cover creating an RTEP for Local 1 and Local 2 and validating the RTEP status.
Creating the RTEP for Location 1 – Example Dallas
System > Configuration > Location Manager > Locations > Location-1 LM (Dallas) > NETWORKING
Click CONFIGURE on the RTEP cluster you’ve already created
Select your edge node that will host the RTEP
Select the RTEP-VLAN-N-VDS from the Edge Switch
Put the VLAN for the RTEP VLAN
Select the RTEP Pool you created earlier from the IP Pool for all Nodes
SAVE
Wait for the successfully completed message
Now we must create the RTEP for the Location-2
Go to the Location-2 LM (FortWorth example)
System > Quick Start > Configure Remote Tunnel Endpoint
Fill out the information again but for your second RTEP
Wait for successfully configured to appear
Confirm your Remote Tunnel Endpoint status is up
Next we will stretch networks